Difference between revisions of "Filament"
From SPORE Wiki
Meisnerdan (Talk | contribs) (Created page with "==Overview== Filament is basically a string of material or 'ink' for 3D Printing. It's usually plastic, although there are some metallic and composite filaments. ==Typ...") |
Meisnerdan (Talk | contribs) m (fixed 3dp link) |
||
| Line 1: | Line 1: | ||
==Overview== | ==Overview== | ||
| − | Filament is basically a string of material or 'ink' for [[ | + | Filament is basically a string of material or 'ink' for [[3DPrinting]]. It's usually plastic, although there are some metallic and composite filaments. |
==Types of Filament== | ==Types of Filament== | ||
Revision as of 21:10, 24 July 2018
Overview
Filament is basically a string of material or 'ink' for 3DPrinting. It's usually plastic, although there are some metallic and composite filaments.
Types of Filament
There are a variety of filaments:
PLA:
- Plant derived
- Easy to print with
- Biodegradable
- Not good for outdoors
TPU:
- Flexible
ABS:
- Strong
- Toxic
- Temperature Sensitive (requires enclosure)
- Can be used outdoors
PETG:
- Strong
- Easier to print than ABS
- Can be used outdoors
Nylon:
- Very Strong
- Prints at high temperature (240-260C--should be printed with all-metal hot end)
- Very hydroscopic (can absorb more than 10% of its weight in less than 24 hours if not stored properly).
- Warps like ABS
- PVA-based glue on heated bed surface works best (@75C).
Others:
- Composites
- Additives like iron, wood, wax, conductive materials, carbon fiber, etc.
